Skip to content
Lumber Calculator

Framing

Floor Joist Calculator

Enter the floor size, joist size and spacing to get the number of joists, their length and the stock to buy — plus rims, blocking, hangers and subfloor, drawn as a framing plan.

Updated October 31, 2026Our methodology

Units
Lumber sizes & prices

Inputs

Floor

ft
ft
Joists span

Joists usually span the shorter direction, between the walls or beams that carry them.

Framing

Solid blocking between joists, spread evenly along the span.

%

Extra for bad boards, mistakes and offcuts.

More options
Stock lengths available

Untick lengths your yard does not carry; the optimizer only buys what is ticked.

Loading 3D…

Results

Lumber list

Enter your dimensions to see the lumber list.

Estimate — check sizes and quantities with your lumber yard.

Results

How many floor joists do I need?

Joists are laid out like studs: one at each end of the floor and one on every spacing mark in between.

joists = ceil(floor length across the joists ÷ spacing) + 1

A floor that is 16 ft along the rims with joists at 16″ on center needs 192 ÷ 16 + 1 = 13 joists. At 24″ on center it needs 9, at 12″ it needs 17. Add 2 when the outside joists are doubled, and add extra joists wherever a wall above runs parallel to the joists or an opening (stairs, a chimney) needs doubled trimmers and headers.

The joist length is the span minus the two rim joists: with 1½″ rims a 12 ft floor takes joists cut to 11′ 9″, bought as 12 ft boards.

Worked example: a 16 × 12 ft floor

The calculator opens with a 16 × 12 ft floor, 2×8 joists spanning the 12 ft width at 16″ on center, rims at both ends and a ¾″ (23/32″) tongue-and-groove subfloor.

PartCountLengthBuy
Joists13 (15 with 10% waste)11′ 9″2×8 × 12′
Rim joists216′2×8 × 16′
Subfloor6 sheets (7 with waste)4 × 8 ft23/32″ T&G

The subfloor is laid with the long edge across the joists and the end joints staggered from row to row; 192 sq ft ÷ 32 sq ft per sheet = 6 sheets, and half of the waste allowance is added to sheets. Whether a 2×8 can actually span 11′ 9″ depends on its species and grade — see the next section.

Joist span: use the span tables

This calculator counts lumber; it does not decide whether a joist is strong and stiff enough. The allowable span depends on the species and grade, the joist size and spacing, and the design load. Sleeping rooms, living areas, decks and attics are all designed for different live loads.

  • In the US, floor joist spans are in IRC section R502.3 and its span tables, and in the American Wood Council's Span Tables for Joists and Rafters. Ceiling joists have their own tables in IRC Chapter 8.
  • Floor tables are built around a deflection limit: IRC Table R301.7 limits floors to L/360 — a 12 ft span may sag no more than 0.4″ under the design live load. That is a stiffness criterion, not a span; it is the reason deeper joists feel less bouncy.
  • Outside the US, use your national span tables (Eurocode 5 based tables in Europe) or ask an engineer.

When the joists are longer than the stock you can buy, the floor needs a beam or bearing wall in the middle, or engineered joists (I-joists or LVL). Dimension-lumber joists are not spliced between supports.

Rims, blocking, hangers and subfloor

  • Rim (band) joists close the joist ends and run the full length of the floor. Long rims are spliced over a joist.
  • Blocking — solid pieces of joist stock between the joists — keeps tall joists from rolling and spreads point loads. Codes require it at supports in some cases; many builders also add a row at mid-span on longer spans. Each row needs one piece fewer than the number of joists.
  • Joist hangers are needed where a joist butts into a ledger, beam or flush header instead of sitting on top of it — two per joist when both ends hang. Use the hanger made for your joist size.
  • Subfloor sheets run with the long edge across the joists and the end joints staggered. For larger or irregular floors, use the plywood and sheathing calculator.

Ceiling joists and deck joists

Ceiling joists are counted the same way — length across the joists ÷ spacing + 1 — but usually sit on the wall top plates without rims: untick Rim joists and the joists run the full width. Ceiling joists that also tie the rafters together are sized from the rafter tie tables, not the ceiling tables.

For a deck, tick Pressure-treated framing and Joist hangers, or use the deck lumber calculator, which adds the ledger, beams, posts, footings and decking.

Frequently asked questions

How many joists do I need for a 12 × 16 floor?

With joists spanning the 12 ft width at 16″ on center, 16 × 12 ÷ 16 + 1 = 13 joists, each 11′ 9″ between two 16 ft rim joists. Order 15 with 10% waste. At 24″ on center you need 9.

How do you calculate the number of floor joists?

Divide the length the joists are spaced along (in inches) by the spacing, round up and add one. Add extras for doubled outside joists, joists under parallel walls and framing around openings, then about 10% for waste.

How far can a 2×8 floor joist span?

It depends on the species, grade, spacing and load, so there is no single number. Look up your exact case in the span tables of IRC R502.3 or the AWC Span Tables for Joists and Rafters, or ask your building department.

Should floor joists be 12, 16 or 24 inches on center?

16″ on center is the most common for floors. 12″ makes a stiffer floor and suits tile; 24″ needs deeper joists and a thicker subfloor rated for that spacing. The span tables give allowable spans for each spacing.

Do joist measurements include the rim joists?

Enter the outside dimensions of the floor. The calculator takes the two rim thicknesses off the joist length, so a 12 ft floor with 1½″ rims gets 11′ 9″ joists.

Can I use this as a ceiling joist calculator?

Yes. Untick the rim joists, set the spacing and joist size, and the count and lengths are the same as for a floor. Check the size against the ceiling joist span tables.

Related calculators

Tools

Projects

Framing

Board feet & pricing

Planning

All calculators

Site

Settings

Units

Lumber sizes & prices

Choose the market whose sizes, stock lengths and sample prices you want.

Theme

Language