Skip to content
Lumber Calculator

Board feet & pricing

MBF Calculator: Lumber Price per Thousand

Type any lumber price — per thousand board feet (MBF), per board foot, per linear foot, per piece or per cubic metre — and see it in every other unit, plus the cost of each piece and of your whole order.

Updated October 31, 2026Our methodology

Units
Lumber sizes & prices

Inputs

Your price

Leave empty to use the sample price shown.

Editable sample prices, used only when the price field is empty.

Lumber

Size
in
in

Board feet are figured on the size you type. For softwood, type the nominal size (2 × 4); for hardwood, the quarter thickness (4/4 = 1″).

ft

Results

Lumber list

Enter your dimensions to see the lumber list.

Estimate — check sizes and quantities with your lumber yard.

Results

How to convert lumber price per thousand (MBF)

Use this lumber calculator per thousand board feet to turn a mill or yard quote per MBF into the price of each board — or convert any price per piece, per foot or per m³ back to MBF.

MBF means one thousand board feet — the M is the Roman numeral for 1,000. Mills, wholesalers and pro yards quote softwood lumber per MBF (you will also see “per M”, MBM or Mfbm). Every other price unit follows from two numbers: the board feet in one piece and the price per board foot.

price per board foot = price per MBF ÷ 1,000
board feet per piece = thickness (in) × width (in) × length (ft) ÷ 12
price per piece      = price per board foot × board feet per piece
price per linear ft  = price per piece ÷ length (ft)
price per MBF        = price per piece ÷ board feet per piece × 1,000

Softwood is tallied on its nominal size, so a 2×4 counts as 2″ × 4″ even though it measures 1½″ × 3½″. The calculator does the same for standard sizes and tells you when it does.

Price per piece at $780 per MBF

PieceBoard feetPrice per piecePer linear foot
2×4 × 8 ft5.33$4.16$0.52
2×4 × 10 ft6.67$5.20$0.52
2×6 × 12 ft12$9.36$0.78
2×8 × 16 ft21.33$16.64$1.04
2×10 × 16 ft26.67$20.80$1.30
2×12 × 16 ft32$24.96$1.56
4×4 × 8 ft10.67$8.32$1.04
6×6 × 12 ft36$28.08$2.34

$780/MBF is the editable sample price for framing lumber used on this site, not a quote. Type your own price to redo the table above for any size in the calculator.

Worked examples

From MBF to price per piece

A yard quotes 2×4 studs at $780/MBF. One 2×4×8 holds 2 × 4 × 8 ÷ 12 = 5.33 board feet. $780 ÷ 1,000 = $0.78 per board foot, so one stud costs 5.33 × $0.78 = $4.16, and 50 studs cost $208.

From price per piece back to MBF

A store sells a 2×4×8 for $4.50. $4.50 ÷ 5.33 board feet = $0.844 per board foot = $844 per MBF. Doing this for each length is the easiest way to see which length is the best buy — longer and wider pieces often carry a higher rate per board foot.

From price per linear foot

Trim and decking are often priced per linear foot. A 2×6 has 1 board foot per linear foot, so $1.10/LF = $1.10 per board foot = $1,100/MBF. A 2×4 has 0.667 board feet per linear foot, so $0.52/LF = $0.78 per board foot. The board feet to linear feet converter lists the factor for every size.

How many pieces in one MBF?

Divide 1,000 by the board feet in one piece: 1,000 ÷ 5.33 = 187.5 pieces of 2×4×8, 1,000 ÷ 12 = 83.3 pieces of 2×6×12.

Lumber prices per thousand in 2026

Published lumber prices are wholesale prices per MBF. A few reference points from 2026, rounded:

  • Framing lumber composite: about $507 per MBF in late September 2026, according to the National Association of Home Builders (NAHB), which tracks a framing lumber price index. That was slightly lower than the month before and a few percent higher than a year earlier.
  • Lumber futures: the CME lumber futures contract traded mostly between about $550 and $640 per MBF from January through July 2026, according to Barchart market reports.

At about $507/MBF, the wood in a 2×4×8 is worth about 5.33 × $0.507 ≈ $2.70 at wholesale. Prices move every week, so treat these numbers as dated context — use the price your yard actually quotes.

Retail vs wholesale lumber prices

The composite and futures prices above describe lumber bought in truckload quantities at mill or wholesale level, usually in random lengths. A retail yard or home center adds its own costs before a single stud reaches the rack:

  • freight from the mill and handling in the yard,
  • sorting into specific lengths and grades, and culling bad pieces,
  • inventory carried through price swings, plus the store's margin,
  • delivery and small-order handling.

So a retail price per piece, converted to MBF, is normally well above the published composite. That is expected — compare retail quotes with each other, not with the futures price. Pro yards that quote per MBF may give a better rate for full units (bundles) and for an order of mixed sizes.

Common mistakes when comparing quotes

  • Comparing per-piece prices of different lengths. A 16-ft board is not “twice the 8-ft price” at every store; convert both to price per board foot.
  • Mixing nominal and actual sizes. MBF prices use nominal board feet. Price per m³ of actual wood is about 50% higher than the same price expressed on a nominal basis for a 2×4.
  • Ignoring grade and species. #2 SPF studs, pressure-treated pine and cedar are separate markets with very different prices per MBF.

Metric: price per cubic metre and per running metre

Outside North America timber is sold per cubic metre (m³) of actual wood, per running metre or per piece. The conversions are the same idea:

price per running metre = price per m³ × thickness (m) × width (m)
price per piece         = price per running metre × length (m)
1 m³ ≈ 423.8 board feet   ·   1 MBF ≈ 2.36 m³ (nominal)

Example: spruce studs 45 × 95 mm at €850/m³. One running metre holds 0.045 × 0.095 = 0.004275 m³, so it costs €3.63, and a 3.0 m piece costs about €10.90.

A US price per MBF does not convert one-to-one into a price per m³ of real wood, because MBF counts the nominal size. 1,000 nominal board feet of 2×4s contain only about 1.55 m³ of actual wood, so $780/MBF works out to about $504/m³. Switch the market and units in the settings menu to work in your local sizes and currency.

Frequently asked questions

What does MBF mean in lumber pricing?

MBF stands for one thousand board feet (M = 1,000). Lumber mills, wholesalers and pro yards quote softwood per MBF; divide by 1,000 to get the price per board foot.

How much is a 2×4×8 at $780 per thousand?

$4.16. A 2×4×8 holds 5.33 nominal board feet, and $780 per MBF is $0.78 per board foot: 5.33 × $0.78 = $4.16.

How do I convert price per piece to price per MBF?

Divide the piece price by the board feet in the piece and multiply by 1,000. A $4.50 2×4×8 is $4.50 ÷ 5.33 × 1,000 = $844 per MBF.

How many 2×4×8s are in 1,000 board feet?

About 187. Each 2×4×8 is 5.33 board feet, and 1,000 ÷ 5.33 = 187.5.

What is the price of lumber per thousand board feet right now?

NAHB put framing lumber at about $507 per MBF in late September 2026, and lumber futures traded at roughly $550–640 per MBF earlier in 2026. Retail prices are higher; enter your yard’s price for a real estimate.

Is the MBF price based on nominal or actual size?

Nominal. Softwood board feet are counted on the nominal size, so a 2×4 is billed as 2″ × 4″ even though it measures 1½″ × 3½″.

How do I convert price per linear foot to price per board foot?

Divide by the board feet per linear foot (thickness × width ÷ 12). A 2×4 has 0.667, so $0.52 per linear foot is $0.78 per board foot, or $780 per MBF.

Related calculators

Tools

Projects

Framing

Board feet & pricing

Planning

All calculators

Site

Settings

Units

Lumber sizes & prices

Choose the market whose sizes, stock lengths and sample prices you want.

Theme

Language