Skip to content
Lumber Calculator

Planning

Lumber Sizes Chart: Nominal vs Actual

A 2×4 is not 2 by 4 inches. Look up the real size of any board in inches and millimetres, with its board feet, weight and price per foot — for US lumber or metric timber in your region.

Updated October 31, 2026Our methodology

Units
Lumber sizes & prices

Inputs

Look up a size

Show

Weight & price columns

Editable sample prices — change them in any lumber list.

The sizes come from the market chosen in Units & region (top right): US & Canada, Europe, Nordics, Brazil, Japan or the Gulf.

Results

Estimate — check sizes and quantities with your lumber yard.

Results

Nominal vs actual lumber sizes

Softwood lumber in the US and Canada is named by its nominal size — roughly the size of the rough-sawn piece before it is dried and planed. What you take home is the smaller actual (dressed) size set by the American Softwood Lumber Standard, PS 20:

  • 1″ boards are ¾″ thick; 2″ dimension lumber is 1½″ thick; 4″ posts are 3½″.
  • Widths up to 6″ are ½″ under nominal; 8″ and wider are ¾″ under.
NominalActual (in)Actual (mm)Board feet per foot
1×2¾ × 1½19 × 380.167
1×4¾ × 3½19 × 890.333
1×6¾ × 5½19 × 1400.5
1×8¾ × 7¼19 × 1840.667
1×12¾ × 11¼19 × 2861
5/4×6 deck board1 × 5½25 × 1400.625
2×41½ × 3½38 × 890.667
2×61½ × 5½38 × 1401
2×81½ × 7¼38 × 1841.333
2×101½ × 9¼38 × 2351.667
2×121½ × 11¼38 × 2862
4×43½ × 3½89 × 891.333
4×63½ × 5½89 × 1402
6×65½ × 5½140 × 1403

Yards still count board feet on the nominal size, so a 2×4 is billed as 2″ × 4″. For weight and true volume, use the actual size — the calculator above does both.

Green vs dry sizes

Wood shrinks as it dries, so PS 20 lists two dressed sizes: a dry size for lumber at 19% moisture or less, and a slightly larger green size for lumber surfaced wet, so that it ends up close to the dry size once it has dried.

NominalDry (in)Green (in)
1″ thick¾25/32
2″ thick1½1 9/16
4″ wide3½3 9/16
6″ wide5½5⅝
8″ wide7¼7½
10″ wide9¼9½
12″ wide11¼11½

Most framing lumber at home centers is kiln-dried (stamped KD or S-DRY). Large timbers and some Douglas fir are sold green (S-GRN) and will shrink in place. Always measure the actual boards before cutting to a fit — sizes drift a little between mills and with moisture.

Hardwood sizes: quarters

Hardwood is not sold in nominal sizes. It is sold rough, in thicknesses measured in quarters of an inch, with random widths and lengths:

QuarterRough thickness
4/41″
5/41¼″
6/41½″
8/42″
12/43″
16/44″

Surfacing removes about 3/32″ per face, so the National Hardwood Lumber Association standard for 4/4 surfaced two sides (S2S) is 13/16″. You still pay for the full quarter thickness in board feet.

Metric timber sizes by country

Metric markets sell timber by its actual size in millimetres. Typical planed sizes (they vary by supplier):

  • Europe (Germany, France, Netherlands …): studs and joists 45 or 60 mm thick — 45 × 70, 45 × 95, 45 × 145, 45 × 195, 60 × 120, 60 × 200 — and square posts 70, 90 and 120 mm. Graded structural timber is usually C24.
  • Nordics: the 45 mm series — 45 × 45, 45 × 70, 45 × 95, 45 × 120 up to 45 × 220 — with 22 and 28 mm boards for cladding and decking.
  • UK: CLS (Canadian Lumber Standard) studs at 38 × 63 and 38 × 89 mm with rounded edges, plus regularised structural timber such as 47 × 100 and 47 × 150 mm.
  • Japan: the 2×4 building system uses North American sizes in mm — 2×4 = 38 × 89, 2×6 = 38 × 140 — while traditional framing uses posts of 105 × 105 and 120 × 120 mm.
  • Brazil: timber is named in cm — ripa 1.5 × 5, sarrafo 2.5 × 10, caibro 5 × 6, viga 6 × 12 and 6 × 16.
  • Gulf: imported timber is often still named in inches (2″ × 4″) but sold around 50 × 100 mm.

A US 2×4 (1½″ × 3½″) is 38.1 × 88.9 mm, so it matches CLS 38 × 89 and the Japanese 2×4 almost exactly, but it is slimmer than a European 45 × 95. Pick your market in the settings menu to see its full size list above. To compare prices between sizes, use the board feet to linear feet converter; for weights of other species, the lumber weight calculator.

Frequently asked questions

What is the actual size of a 2×4?

1½″ × 3½″ (38 × 89 mm) when dry. A green 2×4 is 1 9/16″ × 3 9/16″.

What is the actual size of a 2×6?

1½″ × 5½″, or 38 × 140 mm.

Why is a 2×4 not 2 inches by 4 inches?

The name is the nominal size of the rough-sawn piece. Drying and planing it smooth bring it down to the 1½″ × 3½″ dressed size set by the PS 20 standard.

What is the actual size of a 4×4 post?

3½″ × 3½″ (89 × 89 mm). A 6×6 is 5½″ × 5½″.

How wide is a 2×10 and a 2×12?

A 2×10 is 9¼″ wide and a 2×12 is 11¼″ wide, both 1½″ thick. Widths of 8″ and over are ¾″ under nominal.

What is the metric equivalent of a 2×4?

A US 2×4 is 38 × 89 mm — the same as UK CLS 38 × 89 and the Japanese 2×4. The common European stud is a little larger at 45 × 95 mm.

What size is 5/4 deck board?

A 5/4×6 deck board is 1″ thick and 5½″ wide.

Related calculators

Tools

Projects

Framing

Board feet & pricing

Planning

All calculators

Site

Settings

Units

Lumber sizes & prices

Choose the market whose sizes, stock lengths and sample prices you want.

Theme

Language