Skip to content
Lumber Calculator

6 min read

How Much Lumber for a 100 ft Privacy Fence? Posts, Rails, Pickets and Cost

A 100 ft run of 6 ft privacy fence needs 14 posts, 39 rail pieces, 230 pickets and 22 bags of concrete, about $1,350 in treated lumber. Here is the list line by line and how other styles change it.

By the FreeLumberCalculator.com editorial team

Open the calculatorFence lumber calculator

A hundred feet is a common fence job: one side of a typical suburban lot, or the back line plus a short return. It is also a handy round number, because once you know how much lumber a 100 ft fence takes you can scale it to almost any yard. This guide works through the complete list for a 6 ft wood privacy fence, explains where every number comes from, and then shows how spaced pickets, board-on-board and shadowbox change the order. All figures come from our fence lumber calculator with its default settings, so you can open it and change any input to match your own line.

The fence behind the numbers

The example is the most common DIY privacy fence in the US:

  • Length: one straight run of 100 ft, measured post center to post center, with no gates.
  • Height: 6 ft to the top of the pickets, which stop about 2″ above grade.
  • Posts: pressure-treated 4×4 × 8 ft, no more than 8 ft apart, set 24″ deep in 10″ holes with concrete.
  • Rails: treated 2×4s, three per section, face-mounted on the posts.
  • Pickets: treated 1×6 dog-ear pickets, 6 ft long, butted tight (the privacy style), plus 5% for splits and culls.

The complete 100 ft fence lumber list

QtyItemUsed forSample cost
144×4 × 8 ft, treatedPosts$171.73
19 + 12×4 × 16 ft and 2×4 × 8 ft, treated39 rail pieces$239.20
2301×6 × 6 ft pickets, treated219 pickets + 5%$793.50
2280 lb bags of concrete14 post holes$143.00
≈ 1,470Exterior screws or nailsPickets and rail endsnot priced

That comes to 264 pieces, 1,047 board feet and about $1,347, or roughly $13.50 per linear foot for lumber and concrete at our editable sample prices. Fasteners, hinges and stain are extra. The pickets alone are almost 60% of the bill, which is why the fence style matters more for cost than anything else on the list.

How many posts for a 100 ft fence?

The calculator never stretches a section past your maximum spacing. It divides the run into the fewest equal sections that fit:

sections = 100 ft ÷ 8 ft = 12.5 → 13 sections
posts    = 13 sections + 1 = 14 posts
spacing  = 100 ft ÷ 13 = 7 ft 8 5/16″ on center

Equal sections look better than twelve full 8 ft bays and a short leftover, and they let every rail be cut to the same length. If your fence turns a corner, enter each side as its own run; corners share a post, so two 50 ft runs still need only 14 posts.

Post length follows the rule of thumb of burying about a third of the post, or going below the frost line if that is deeper. A 6 ft fence with 24″ in the ground needs exactly 8 ft, so a standard 4×4 × 8 is enough with nothing to trim. In cold climates, frost depth can be 36″ or more, which pushes you to 10 ft posts. Ask your building department for the local figure.

Rails: three per section, two sections per board

Fences up to about 4 ft get two rails, up to about 6½ ft three, and taller fences four. With three rails and 13 sections, you need 39 rail pieces, each about 7 ft 8 5/16″ long. Because face-mounted rails joint on the post centers, two sections fit on one 16 ft 2×4 with a little to spare, so 19 sixteen-footers plus one 8 ft board cover all 39 pieces. If your yard does not carry 16s, run the rail lengths through the cut list optimizer with the lengths you can get; it packs the cuts and shows the offcuts.

Pickets: count from the actual width

A 1×6 picket is really 5½″ wide. For a privacy fence with the boards butted together, the count is simply:

pickets = 100 ft × 12 ÷ 5½″ = 218.2 → 219
with 5% waste            → 230 pickets

Using the nominal 6″ would give 200 pickets and leave you about 19 short. Treated pickets also shrink as they dry, so a fence installed tight will open small gaps within a season. Some builders leave a ¼″ gap from the start and accept the slightly lower count; you can model that in the calculator with the spaced style and a ¼″ gap.

Concrete. A 10″ hole 24″ deep, minus the volume of the post, takes about 1.5 bags of 80 lb concrete, so 14 holes need 22 bags. That is about 1,760 lb of concrete, so plan on a delivery or several trips. Wider holes or deeper frost footings raise the count quickly, and the calculator recomputes it as soon as you change the hole size.

Privacy vs picket vs board-on-board: how the style changes the list

Posts and rails stay the same for every 6 ft style; only the pickets change. Here is the same 100 ft run in each style, with 1×6 pickets:

Style (6 ft high unless noted)Picket spacingPicketsBoard feetWeightEst. cost
Privacy (butted)5½″2301,0473,018 lb$1,347
Spaced pickets, 2½″ gap8″1588312,400 lb$1,099
Board-on-board, 1″ overlap9″, two layers2821,2033,465 lb$1,527
Shadowbox, 1″ overlap9″, two layers2821,2033,465 lb$1,527
Spaced pickets, 4 ft high8″1586041,759 lb$838

Board-on-board puts a second layer of pickets over the gaps of the first. Each pair covers 2 × 5½″ minus two 1″ overlaps, so one pair every 9″, and you end up with about 23% more pickets than a plain privacy fence, but no see-through gaps when the boards shrink. Shadowbox uses the same number of boards; the difference is that the layers sit on opposite faces of the rails, so the fence looks the same from both sides. A 4 ft picket fence drops to two rails per section and 4 ft pickets, which is why it costs a little under two-thirds of the privacy fence.

Adding a gate changes less than you might expect. With one 4 ft gate at the end of the run, the calculator still uses 14 posts (two of them gate posts), but the fence sections drop to 12 and the rails to 36. Gate hinges and a latch are listed but not priced. Heavy gates are usually hung on 6×6 or well-braced 4×4 posts; size them for the gate you are building.

Buying tips for a 100 ft fence

  1. Check the rules first. No building code sets how much lumber a fence needs, but cities and HOAs limit height, set back the line from sidewalks and require permits in many places. Have the property line marked and call 811 before you dig.
  2. Use ground-contact posts. Posts should be pressure-treated and rated for ground contact; rails and pickets can be above-ground treated, cedar or another outdoor species.
  3. Price pickets by the bundle. Pickets are the biggest line, and yards often discount full bundles. If a yard quotes per thousand board feet, our guide to lumber price per thousand board feet shows how to turn that into a price per picket.
  4. Plan the haul. At about 3,000 lb for the privacy version, the lumber alone is two loads for a typical half-ton pickup, before the concrete.
  5. Buy a few extra rails. One or two spare 2×4s cost little and save a trip when a board is badly crowned.

Get the list for your own fence

Very few fences are exactly 100 ft in a straight line. Open the fence lumber calculator, enter each run, pick the style, height, post spacing and gates, and it produces the full list with a 3D view of one section. Type in your yard’s prices to get a real total, use the lumber cost calculator to add sales tax and delivery, and add the fence to the lumber calculator list if you are buying for other projects at the same time.

Frequently asked questions

How many pickets do I need for a 100 ft fence?

For a privacy fence with 1×6 pickets (5½″ actual) butted tight, 219 pickets, or 230 with a 5% allowance. Spaced pickets with a 2½″ gap need 158, and board-on-board or shadowbox with a 1″ overlap needs 282.

How many posts are in a 100 ft fence?

With posts no more than 8 ft apart, 14 posts: 13 equal sections of 7 ft 8 5/16″ plus the end post. At 6 ft spacing you would need 18.

How much does the lumber for a 100 ft privacy fence cost?

About $1,350 for treated posts, rails, pickets and concrete at our October 2026 sample prices, or roughly $13.50 per foot. Fasteners, gate hardware and labor are extra. Enter your local prices in the calculator for your own figure.

How many bags of concrete for 100 ft of fence?

About 22 bags of 80 lb concrete for 14 posts in 10″ holes 24″ deep, or 1.5 bags per hole. Deeper or wider holes need more.

Calculators used in this article

More from the blog

Tools

Projects

Framing

Board feet & pricing

Planning

All calculators

Site

Settings

Units

Lumber sizes & prices

Choose the market whose sizes, stock lengths and sample prices you want.

Theme

Language