5 min read
How Much Lumber to Build a 24×24 Garage? Walls, Header, Roof and Cost
A 24×24 garage with 9 ft walls and a stick-framed roof takes about 220 pieces of lumber (2,496 board feet) and 58 sheets of OSB, roughly $2,900 at sample prices. Here is the list, and what changes with trusses.
By the FreeLumberCalculator.com editorial team
A 24×24 garage is the classic detached two-car size: 576 square feet, room for two cars and a workbench, and a roof that spans 24 ft with ordinary lumber or with trusses. If you are pricing one, the first question is how much lumber it takes to build a 24×24 garage, and the honest answer is that it depends mostly on the roof. This guide goes through the full framing list for the walls, the garage door header and a stick-framed roof, then shows how the order changes with trusses. Every number comes from our garage lumber calculator at its default settings, so you can open it and adjust anything.
The garage behind the numbers
- Footprint: 24 × 24 ft on a concrete slab, gable roof spanning the 24 ft direction.
- Walls: 9 ft high, 2×4 studs at 16″ on center, 3-stud corners, double top plate and a pressure-treated bottom plate on the slab.
- Openings: one 16 × 7 ft overhead door, one 38 × 82″ service door and two 36 × 36″ windows.
- Roof: 2×8 rafters at 16″ on center, 4/12 pitch, 12″ eaves and 6″ rakes, a 2×10 ridge board, 2×6 ceiling joists and collar ties on every other pair.
- Sheathing: 7/16″ OSB on the walls and roof.
Not included: the slab, anchor bolts, the doors themselves, roofing, siding, trim and fasteners.
The complete 24×24 garage lumber list
| Qty | Item | Used for |
|---|---|---|
| 80 | 2×4 × 104 5/8″ precut studs | Wall studs for 9 ft walls |
| 8 | 2×4 × 12 ft, treated | Bottom plates |
| 16 | 2×4 × 12 ft | Double top plates |
| 16 | 2×4, 8 to 20 ft | Jacks, cripples, blocking, rough sills, gable studs |
| 2 + 1 + 1 | 2×12 × 18, 14 and 8 ft | Headers |
| 47 | 2×8 × 14 ft | 42 rafters (including fly rafters) + waste |
| 2 | 2×10 × 14 ft | Ridge board |
| 38 | 2×6 × 12 ft | 19 ceiling joists, two boards each |
| 5 | 2×8 × 18 ft | Collar ties |
| 4 | 2×8 × 14 ft | Fascia |
| 34 | 7/16″ OSB 4×8 | Wall sheathing |
| 24 | 7/16″ OSB 4×8 | Roof sheathing |
In total that is 220 pieces of lumber (2,554 linear feet, 2,496 board feet) plus 58 sheets, weighing about 6,300 lb. At our editable sample prices it comes to about $2,898, or $5.03 per square foot of floor. Roughly $700 of that is wall framing, $42 gable studs, $1,228 the roof framing and $928 the OSB.
Walls: studs, plates and openings
With 9 ft walls the calculator uses precut 104 5/8″ studs, which give a 9 ft wall with a single bottom plate and a double top plate. Studs at 16″ on center around a 96 ft perimeter, plus 3-stud corners and the king studs at each opening, come to 80 full-length studs. The jacks, cripples above and below the windows, and blocking are cut from a handful of long 2×4s.
The front and back walls run the full 24 ft and the side walls fit between them. Plates are bought as 12 ft boards: eight treated for the bottom plates, which sit on the slab, and sixteen for the double top plate, with joints staggered. If you want to see how the stud count works for each wall, our post on how many studs a wall needs goes through it, and the framing lumber calculator handles single walls with any openings.
The 16 ft garage door header
The garage door header is the most important structural piece in the walls. It carries the roof load over a 16 ft opening, so it is much bigger than a window header. The calculator lists built-up 2×12 headers as a placeholder, but a 16 ft garage door header usually needs a built-up or engineered beam (LVL or glulam), sized from IRC Table R602.7(1) or by your supplier for your roof load and snow load. This is one line on the list where you should ask the lumber yard or a designer, and check your local code, before you order.
Roof: rafters, ceiling joists and ridge
A stick-framed gable roof over 24 ft at 16″ on center has 19 pairs of rafters plus fly rafters at the gable overhangs, 42 in all. At a 4/12 pitch with a 12″ eave, each rafter is about 164 7/8″ (13 ft 8 7/8 in) before cutting, so it comes out of a 14 ft 2×8. The rafter calculator gives the exact plumb cut, birdsmouth and overhang for any pitch.
Rafters push out on the walls, so they must be tied together. Here 19 ceiling joists at the wall plates do that job, each made from two 12 ft 2×6s spliced over the 24 ft span; the splices must land on a support. Collar ties on every other pair add stiffness higher up. A 2×10 ridge board, in two 14 ft lengths, and 2×8 fascia finish the frame. Rafter and ceiling joist sizes depend on the span, snow load and species, so confirm them against the span tables in your local code.
Rafters vs trusses for a 24×24 garage
Most new garages use prefabricated trusses instead of rafters. Here is how the order changes with trusses at 24″ on center:
| Stick-framed rafters | Trusses | |
|---|---|---|
| Roof members | 42 rafters, 19 ceiling joists, ridge, collar ties | 13 trusses, including the two gable ends |
| Lumber pieces | 220 | 127 |
| Board feet | 2,496 | 942 |
| Sheathing | 58 sheets | 58 sheets |
| Weight | about 6,300 lb | about 4,000 lb, plus trusses |
| Cost at sample prices | $2,898 ($5.03/sq ft) | $1,687 ($2.93/sq ft) + the truss quote |
The calculator does not price trusses, because they are made to order. The useful number is the difference: about $1,212 of rafters, ridge, ceiling joists and collar ties drops off the lumber list. If a truss supplier quotes less than that for the 13 trusses, trusses are cheaper on materials alone, and they go up much faster. They also come with engineering, which many building departments like to see. On the other hand, standard trusses leave little usable attic space, while rafters with a raised ceiling or attic trusses can give you storage overhead.
Sheathing and buying tips
The 58 sheets are 34 for the walls and 24 for the roof. Sheathing alone is about a third of the bill, so it pays to price it separately. The plywood calculator handles other sheet types, such as 1/2″ CDX or T1-11 siding that doubles as sheathing.
- Get the permit first. A detached garage almost always needs one, and the plans examiner may require specific header sizes, anchor bolts, hurricane ties or truss drawings.
- Order the header early. Engineered beams are sometimes special-order items.
- Have it delivered. More than three tons of lumber and OSB is not a pickup job, and most yards deliver a full package.
- Keep it dry. Store lumber flat and covered on the slab until you need it.
Get your own garage lumber list
Open the garage lumber calculator, pick a size or type your own, set the wall height, doors, windows and roof, and it produces the full list with a 3D model. Switch between rafters and trusses to compare, enter your yard’s prices, and print the list or send it for a quote.
Frequently asked questions
How much lumber do I need to build a 24×24 garage?
With 9 ft walls, 2×4 studs at 16″ and a stick-framed 4/12 roof, about 220 pieces of lumber (2,496 board feet) plus 58 sheets of 7/16″ OSB. With trusses, about 127 pieces (942 board feet), 58 sheets and 13 trusses.
How many studs are in a 24×24 garage?
About 80 full-length studs at 16″ on center, including 3-stud corners and the king studs at the openings, plus jacks and cripples cut from a few long 2×4s.
How much does the lumber for a 24×24 garage cost?
About $2,900 for framing lumber and OSB with a rafter roof at our October 2026 sample prices, or about $1,700 plus the truss quote with trusses. The slab, doors, roofing and siding are extra. Enter local prices for your own figure.
What size header do I need for a 16 ft garage door?
It depends on the roof span and snow load. A 16 ft opening usually needs a built-up or engineered beam (LVL or glulam), sized from IRC Table R602.7(1) or by your supplier. Check your local code.
Is it cheaper to use trusses or rafters on a 24×24 garage?
At sample prices, trusses remove about $1,212 of lumber from the list, so they are cheaper on materials if the truss quote is below that, and they save a lot of labor.